Preparing for an Audit

Preparing for an audit is a very important step for your organization. The external audit from a 3rd party registrar is the final step before your organization receives certification to ISO 9001.

Preparing for an Audit

Preparing for an audit is a very important step for your organization. The external audit from a 3rd party registrar is the final step before your organization receives certification to ISO 9001.

The auditors have several objectives:

  • Verify that your documentation meets all of the requirements of the standard.
  • Ensure your employees know their role in the QMS and are familiar with the ISO 9001 requirements that pertain to their role in the organization.
  • The procedures and aprocesses are correctly followed.

Preparing for an Audit

The results will either grant you certification or require corrective actions your organization must meet before becoming accredited.

When the day of the registration audit has arrived, it is time to showcase your QMS and how you have addressed the requirements. Being audited is time-consuming and costly so you want to make sure that you are well prepared. Below we will discuss some tips to help your organization ensure that you are ready in order to have a successful audit.

Give the organization ample time to 

Preparing your organization for an audit takes time and effort. When you have decided that receiving certification is necessary for the organization, you should set goals and give an appropriate amount of time to meet the requirements of the standard.

Prepare the employees

Your employees are the ones that will demonstrate that your organization is complying with the requirements of ISO 9001. Before the audit you will want to make sure that all employees know when the audit will be taking place and what the scope of the audit is. Each employee should have a clear idea of the organization’s quality objectives, and how their role contributes to them. Each employee should have proper training on the tasks that they perform.  

When you are preparing your employees to answer questions, remember this is not a test, auditors are not looking for an exact answer, rather they want to know how employees go about finding information and answers. Do procedures provide information? If the information is not in a procedure, where does the employee go next, do they ask a supervisor?

Documented Information

Documented information is another important aspect of preparing for an audit. When you are preparing for your audit, you need to ensure that documents and record lists have been updated. Additionally, all documents need to have been reviewed, approved, communicated and followed by everyone involved in the process or activity. You should also ensure that no one is using outdated documents.

Processes and Procedures

Processes and Procedures need to be carefully followed. Your organization needs to make sure all processes are meeting the planned arrangement you set out to achieve, and that they are being followed and performed in the same and correct way by all employees.

Prepare the facility

When you are preparing for an audit your organization needs to be well-organized and cleaned. If your facility is a mess, it is easy to miss nonconformances. You want to make sure that you are well aware of every area of the facility so that you do not have to encounter any hidden issues during the audit. When getting your organized ready for the audit, check bulletin boards, counters, drawers, etc for uncontrolled documents, uncalibrated measuring and monitoring instruments and unidentified parts or supplies.

Internal Audit

The organization must conduct an internal audit. Not only is this a requirement of the ISO standard, but it is also the best way to catch any major nonconformances. Internal audits should be taken seriously. They are also a great way to prepare staff for the interview process. Remember that the purpose of an internal audit is to identify weaknesses and areas that need improvement in order to increase the effectiveness of the management system and prepare for external audits.

Management Review

The management review should take place following the internal audit. This step should consist or reviewing past internal audit findings and take corrective actions where necessary.

Review past Internal Audit Findings

After your organization undergoes an Internal Audit, these findings should be reviewed in a closing meeting with everyone involved. The purpose of an internal audit is to identify possible weaknesses and areas that need to be improved in order to better the management system and meet the requirements of ISO 9001, and earn certification. To have a successful audit, it is a must that the process of the audit is carried out with both auditors and auditees

The meeting should be detailed to give the organization an understanding of where they are falling short and how they can improve. This information should be given in an objective and friendly manner and suggestions should be informed constructively.

Review Corrective Action Process

Reviewing past audits and taking corrective action to any nonconformances is key to certification and is a key step while preparing for an audit. We recommend taking corrective actions immediately to avoid compromising your ability to achieve certification. A major problem found by the auditor could delay your certification and leave you scrambling to establish a process to fix the issue. Performing internal audits in preparation for your third-party auditor is ideal.

Pre-Assessment

A pre-assessment audit is performed with the same independence and objectivity as a 2-stage certification audit. The auditor will conduct an assessment that monitors documentation review, process review, etc in order to understand where the organization is relative to meeting the standard’s requirements.

Pre-assessment audits are performed on-site and are a complete assessment of the ISO 9001 management system. All nonconformities and observations found will be presented in an audit report that will be delivered at the end of the process. This report will allow the organization to improve its processes and implement any necessary corrective actions.

Pre-assessment audits are recommended for any organization that has implemented a  management system and wishes to undergo a certification audit. A Pre-Assessment audit can be conducted by qualified consultants, registrars, or other competent individuals that understand the management system being audited. The organization that will perform the 2-stage certification audit may also offer pre-assessment audits as well.

2-Stage Certification Audit

After your organization has completed the above steps you will have completed the steps for preparing for an audit and will be ready for the 2-stage certification audit. 

Have a professional audit

Remember to act professionally. Auditors are there to help the organization uncover any nonconformances and weaknesses in order to take action, improve and become certified. Remember they want your organization to succeed, so be friendly and work together in order to achieve certification.

MAKE ISO 9001 REGISTRATION SIMPLE AND FOOLPROOF!

     Source: synthesis

 


Related News

7 Quality Management Principles - Part 1/2
7 Quality Management Principles - Part 1/2

32788 Views

The QMPs can be used as a foundation to guide an organization’s performance improvement. They were developed and d by international experts of ISO/TC 176, which is responsible for developing and maintaining ISO’s quality management standards.
Food safety management systems ISO 22000:2018
Food safety management systems ISO 22000:2018

13479 Views

ISO 22000:2018, Food safety management systems – Requirements for any organization in the food chain, sets out the requirements for a food safety management system. It defines what an organization must do to demonstrate its ability to control food safety hazards and ensure that food is safe for consumption.
Vote starts on final draft of ISO 45001 for occupational health and safety
Vote starts on final draft of ISO 45001 for occupational health and safety

4372 Views

ISO 45001 Occupational health and safety management systems – Requirements with guidance for use
TL 9000:2016 Requirements Handbook (R6) Available NOW!!
TL 9000:2016 Requirements Handbook (R6) Available NOW!!

5996 Views

The Integrated Global Quality (IGQ) Working Group has recently completed content changes on a new revision of the TL 9000 Requirements Handbook, TL 9000:2016 (R6).
CARBON NEUTRAL VS NET ZERO: WHAT’S IN IT FOR BUSINESS?
CARBON NEUTRAL VS NET ZERO: WHAT’S IN IT FOR BUSINESS?

409 Views

Net Zero is our strongest tool yet against the climate crisis. The transition to Net Zero emissions presents a compelling solution that offers not only environmental benefits but also economic, social and health advantages.
STANDARDS TO SUPPORT ISO 9001 HAVE JUST BEEN UPDATED.
STANDARDS TO SUPPORT ISO 9001 HAVE JUST BEEN UPDATED.

860 Views

Improved quality, performance, efficiencies and business relationships are just some of the benefits of implementing a quality management system (QMS) such as ISO 9001
What is IATF16949:2016?
What is IATF16949:2016?

746 Views

What is IATF 16949:2016? The IATF maintains strong cooperation with ISO by continuing liaison committee status ensuring continued alignment with ISO 9001.
The ISO Survey of Management System Standard Certifications 2016
The ISO Survey of Management System Standard Certifications 2016

10866 Views

The ISO Survey of Certifications is an annual survey of the number of valid certificates to ISO management system standards worldwide
ISO 45001 is now published
ISO 45001 is now published

19305 Views

The world’s much anticipated International Standard for occupational health and safety (OH&S) has just been published, and is set to transform workplace practices globally

Comment
  • Your review